Toro 5000 Series 60" (152 cm) 25 HP 747cc (72915)

Call for Price

Key Features

Availability Brochure

MakeToro

Model5000 Series 60" (152 cm) 25 HP 747cc (72915)

Product Features

Description

5000 Series 60" (152 cm) 25 HP 747cc (72915)

Z Master® 5000 Series - 25 hp (18.4 kw) Kohler® Command Pro 747cc Engine with 60 in (152 cm) TURBO FORCE® deck.

Highlights

25 hp (18.4 kw) Kohler Command Pro 747cc Engine
60 in (152 cm) TURBO FORCE deck
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue
Unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points

Features

Deluxe Handcrafted Seat with Arm Rests: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

Specifications

Engine: 25 hp* (18.4 kw) Kohler® Command Pro 747cc
Fuel Capacity: Gasoline - 12 gal (45.4 L) single-point fill
Adjustable Discharge Baffle: Standard
Air Filter: Heavy-Duty Canister Air Cleaner
Blade Tip Speed: 18,500+ ft/min (5638.8 m/min)
Blade Type: .25 in (.6 cm) thick heat-treated steel
Carrier Frame: 3 in x 1.5 in (7.6 cm x 3.8 cm) tubular steel
Caster Tires: 13 in x 6.5 in - 6 in (33 cm x 16.5 cm -15.2 cm) flat-free semi-pneumatic
Deck Design: 80-Grade 7-gauge 60 in (152 cm) TURBO FORCE® w/ bull-nose bumper
Discharge Chute: Rubber
Drive System: Hydraulic unitized pumps and wheel motors
Drive Tires: 23 in x 9.5 in -12 in (58.4 cm x 24.1 cm - 30.5 cm)
Ground Speed: 10 mph (16.1 kph) forward
Height of Cut: 1 in - 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
Hour Meter: Standard
Hydraulic Fluid: Premium synthetic
ROPS: Folding; standard
Seat: Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
Spindle Bearings: Greaseless ball bearings
Spindle Housing: 9" (22.9 cm) diameter cast aluminum
Steering Controls: 1.625 (4.1 cm) dia. levers; adjustable

NOTES:

*The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.